Professional Deck Restoration Services in Melbourne

Complete deck restoration across Melbourne’s North. We strip, sand, repair, and refinish timber decks using our proven 9-step process. 17+ years experience, 183 five-star reviews. Call 1300 363 478 for a FREE quote.

What Is Professional Deck Restoration?

Deck restoration isn’t just a quick sand and coat of oil. It’s a complete rejuvenation process that takes your weathered, grey, splintering deck back to its original beauty—or better.

Over 5-10 years, Melbourne’s UV exposure, rain, temperature swings, and leaf litter break down timber at a cellular level. The surface oxidises (turns grey), oils leach out, the grain raises and splinters, and coatings peel or fade. Simply slapping oil on top of this damage won’t work—it needs to be stripped back to fresh timber first.

Professional restoration means removing all the damaged surface layer, rectifying structural issues like cupping and warping, deep-cleaning embedded contaminants, and applying a protective finish to properly prepared timber. Done right, a restored deck can last another 10-15 years before needing major work again.

We Actually Fix Cupping — Most Companies Don’t

Here’s what most deck companies won’t tell you: they skip the hard work. They’ll run a light surface sand that does nothing to fix cupped, uneven boards. Then they slap on 3 heavy coats of oil trying to hide the fact that corners were cut on prep work.

We do the opposite. We use 5 waves of sanding with various methods and grits to actually rectify cupping and level your boards. It’s harder work. It takes longer. But it means your deck is genuinely flat, water drains properly, and you get a finish that lasts—not one that’s masking poor preparation.

The difference? Our decks stay protected longer because the oil penetrates properly prepared timber. Their decks look okay for 6 months, then the oil film breaks down and you’re back to square one.

Our 9-Step Deck Restoration Process

This is our complete restoration system—developed over 17+ years and hundreds of Melbourne decks. No shortcuts. No compromises.

Step 1: Countersinking & Prep

We neatly countersink any raised fixtures (screws, nails, bolts) so the deck can be sanded safely and evenly. No ankle-biters, no snags, no drama. We also move furniture, pot plants, BBQs—and put everything back when we’re done.

Step 2: Decupping & Levelling Sand

Your boards get a flattening pass to remove cupping and uneven spots. We use aggressive-grit belt sanders to actually level the timber, not just scratch the surface. This stops water pooling, eliminates trip hazards, and gives your deck a smoother underfoot feel.

This is the step that separates professional restoration from amateur work. Most companies skip it because it’s physically demanding and time-consuming. We don’t skip it—ever.

Step 3: Full Deck Sanding

We take the entire deck back to a fresh skin of timber—removing old coatings, splintering, rough grain, and years of weathering. We use 5 waves of sanding: heavy belt sanding for levelling, medium belt sanding for smoothing, orbital sanding for grain refinement, edge sanding for corners and balustrades, and hand sanding for details.

By the time we’re done, your deck looks like new timber. No grey. No splinters. No rough patches.

Step 4: Deep Degrease

A specialised degreasing treatment draws out oils, tannins, contaminants, and anything that has worked its way deep into the boards. This is critical for Melbourne decks with eucalypt leaf litter (tannin staining), BBQ grease, or old oil buildup.

Standard cleaners sit on the surface. Our degrease penetrates deep and pulls contaminants out from the timber pores.

Step 5: Orbital Scrub Treatment

An orbital power scrubber agitates the degreasing treatment throughout the grain, lifting dirt and grime that basic washes can’t touch. Think of it like deep-cleaning carpet versus vacuuming—this is the deep clean.

Step 6: Fine Sand Finish

A second, softer sand removes any remaining coating residue, raised grain from the wet treatment, and prepares the timber for a premium finish. This creates the smooth, open-grain surface that allows maximum oil penetration.

Step 7: Low-Pressure Clean

We wash the deck using no more than 1000 PSI to protect the timber while flushing out the final impurities. High-pressure washing (2500+ PSI) damages timber fibres and causes premature deterioration—we never use it.

Step 8: Timber Brightening

A brightening treatment restores natural colour, balances the tones across the entire deck, and increases oil penetration for a better final result. This is especially important for Merbau (brings back the rich browns) and spotted gum (enhances the honey tones).

Step 9: Return Visit for Coating (Weather Dependent)

Once the deck is completely dry and weather conditions are right (no rain forecast for 48 hours), we return to apply 2 coats of high-performance water-based oil for UV protection, water repellency, and a beautiful finish.

We use premium brands like Cabot’s Aquadeck, Intergrain UltraDeck, and Cutek—chosen specifically for Melbourne’s climate and your timber type.

Why Choose Deck Rejuvenation?

17+ Years, 183 Five-Star Reviews, Zero Shortcuts

We’ve been doing this since the early 2000s. We’re a family business based in Carlton, servicing Melbourne’s North. Ben and the team have restored hundreds of decks across Eltham, Diamond Creek, Warrandyte, Ivanhoe, Northcote, and beyond.

We’re not the cheapest. We’re the most thorough. Our 9-step process takes longer and costs more than a quick sand-and-oil, but it delivers results that last 3-5 times longer.

Honest Advice, Even If It Costs Us Work

We’ll tell you if your deck needs full restoration or just a maintenance coat. We’ll tell you if repairs are needed before we sand. We’ll even tell you if DIY is the better option for your situation. That honesty has earned us a 5.0 star rating from 183 genuine customers.

We Fix Problems, Not Symptoms

Cupping? We level it. Tannin stains? We extract them. Mould? We scrub it out of the grain. Splintering? We sand back to smooth timber. We don’t hide problems with thick coats of oil—we fix them properly.

Melbourne’s Most Common Decking Timbers

We restore all timber types, but these are the most common we see in Melbourne:

Merbau

Dark red-brown hardwood, extremely durable, prone to tannin bleeding when wet. Needs proper degreasing and brightening to restore colour. We’ve restored hundreds of Merbau decks—it’s Melbourne’s most popular choice from the 1990s-2010s.

Spotted Gum

Light to medium brown with distinctive “spots,” very hard, weathers to silver-grey. Responds beautifully to restoration—goes from grey back to honey tones. Popular choice for newer decks (2010s onwards).

Jarrah

Rich red hardwood, similar to Merbau but slightly lighter. Common in older Melbourne homes (1980s-90s). Needs careful sanding to avoid over-darkening.

Treated Pine

Softwood, light colour, budget-friendly. Requires gentler sanding than hardwoods. Can be stained to darker colours. Common for verandahs and budget builds.

Service Areas

Based in Carlton, we service Melbourne’s North within a 30km radius of Eltham. We regularly work in:

Eltham, Diamond Creek, Warrandyte, Park Orchards, Gisborne, Ivanhoe, Northcote, Thornbury, Blackburn, Montmorency, Rosanna, Research, Greensborough, Bundoora, Macleod, Heidelberg, and surrounding suburbs.

Not sure if we service your area? Call 1300 363 478 and ask.

Transparent Pricing

Most Melbourne deck restorations cost between $3,000-$8,000 depending on:

• Deck size – Measured in square metres (m²)
• Timber condition – Heavily weathered decks need more sanding time
• Repair requirements – Structural repairs add to the cost
• Access – Second-storey decks or difficult access may require scaffolding
• Oil choice – Premium oils (Cutek, Intergrain) cost more than standard (Cabot’s)

We provide exact quotes over the phone once we know your deck dimensions and timber type. No hidden costs. No surprise extras.

Frequently Asked Questions

How long does deck restoration take?

For a standard 40-60m² deck, we complete the 9-step process over 2-3 days. Day 1-2 is sanding and treatment. We return on Day 3 or later (weather permitting) to apply the finish. Larger decks take longer.

Can you restore really old decks?

Yes—as long as the structure (joists, bearers, stumps) is sound, we can restore the surface. We’ve brought back 20+ year old decks that looked beyond repair. If structural work is needed, our deck repair service handles that first.

What’s better—restoration or replacement?

Restoration costs 30-50% of replacement and extends your deck’s life by 10-15 years. Replacement only makes sense if the structure is rotten, termite-damaged, or you want to change the deck layout.

Do you remove furniture and pots?

Yes—we move everything off the deck, protect surrounding areas with drop sheets, and return everything when we’re done. You don’t lift a finger.

How long until I can use the deck?

After the final oil coat, wait 24-48 hours before walking on it, 7 days before replacing furniture, 14 days before heavy use (parties, etc.).

Can you match my existing colour?

Absolutely. We can restore your timber’s natural colour or go lighter/darker with tinted oils. We’ll show you samples before we start.

Your Benefits

• A safer, flatter, splinter-free deck – Kids, dogs, bare feet—everyone wins.
• Restores the true colour and character of your timber – Especially important for Merbau and tannin-rich hardwoods.
• Stops deterioration before it becomes structural – Reducing long-term repair costs and extending deck life.
• Premium finish that lasts longer – Better oil penetration → better protection → better value.
• Improves property appeal instantly – A freshly restored deck always looks like a renovation.

What Our Customers Say

“Ben’s team managed to get my tired deck sanded, cleaned, treated and restored all in one day. They were very careful, professional and punctual. 100% would recommend.”

“Our deck was transformed! Ben’s attention to detail and honest advice made the whole process easy.”

“The team was meticulous in their process and communicated every step. Highly recommend Deck Rejuvenation.”

Ready To Restore Your Deck?

Call 1300 363 478 now for a FREE same-day quote. We’ll discuss your deck size, timber type, and condition—and provide an exact price over the phone.

We also offer professional deck sanding, deck oiling, and deck repair services across Melbourne’s North.

Deck Rejuvenation
Suite 47/139 Cardigan St, Carlton VIC 3053
Phone: 1300 363 478
17+ Years Experience | 183 Five-Star Reviews